Recessed spot with only 40 mm built-in height, low glare, high luminous flux (CRI95) and 100% flicker-free dimming. Screw springs for mounting makes the spot particularly suitable for plaster ceilings and acoustic ceilings like Troldtekt, Rockfon etc.
Package: 1 piece
Light source: 6W LED Light source, 350 lumen, CRI95
Kelvin: 2700K - 2200K (DimTone) The light gets warmer at dimming like a regular incandescent bulbs
Dimmable (see recommnded dimmers below)
Cut-out measure: 74,5 mm
Built-in height: 40 mm
Outer measure: 88 mm
IP rate: IP44
Certification: / CE, RoHs
Mounting: Directly in the insulation without the use of a spacer
Tightness: Meets air tightness requirements in BBR
Usable cables: Normal 70° kabler, although 90° cables if the cables are touching the lamp cylinder
Ceiling thickness: Adjustable springs allow mounting in different ceiling thicknesses
Forward looping: Spring clamps allow forward looping up to a 3Gx2.5 mm2 pole cable
Dimmable with:
LK Fuga UNI 350 Touch UNI350 (min 2)
LK Fuga Mek-S CR LK IHC/SA 400 UNI (min 4 - flickers a little at 1-3 on lowest level)
IHC Wireless Version 2 (junction box)
Eltako EUD12NPN-UC (must be set to auto-noise at LC 1, 2 or 3)
Eltako EUD61NPN-UC (dims to 0 on LC 1)
Dimlight 600-m/cr
NB: The dimmer must not be overloaded - see instructions from the supplier (When calculating total wattage, the actual wattage of the LED source should not be taken into account, but the light source must be compared to traditional 35W-50W halogen light source).
